Amor's Blog

How To Get All Coolant Out Of Engine Block . The basic steps to flush a car engine block are: To clean out residue in the cooling systems of modern engines which contain aluminium parts you need to start by flushing. Balance shaft failure on Mercedes V6 engines JE Robison Service from robisonservice.blogspot.com Remove the top radiator hose and flush the system out with a normal hose. Make sure that the radiator fans are cycled at least twice. Using a 3/4″ wrench, carefully open the radiator drain (located on the drivers side of the radiator right behind the air dam) and allow to complete drain into bucket (hot).

How To Drain Engine Block Of Coolant . Fill the engine with distilled water, take it for a ride to get the thermostat opened up, drain and refill with distilled water, and repeat until its clear. I like to do it with the trucks nose down hill to drain the back of the block. How to do a VW Passat TDI coolant flush and change from www.myturbodiesel.com Leave the blue plastic screw out underneath the car. This video is not sponsored. With the drain open on the radiator, pressurize the block with a compressed air through the heater hose quick coupling.